Honeywell HICC-P-3100IRV User Manual page 50

Network Camera User's Guide
3. Disable all event trigger and/or schedule trigger functions first.
4. In this web page, click "Browse" button. Select the Firmware binary file.
5. Once the firmware file was selected, click "Firmware Upgrade" button.
6. The upgrade progress information will be displayed. Once the uploading process
completed, the device will reboot the system automatically.
7. Please wait for timer countdown, and then you can use IPWizard II to search the
device again.
Warning!!!
The download firmware procedure cannot be interrupted. If the
power and/or network connection are broken during the download procedure, it
WILL cause serious damage to the device.
Strongly suggest that DO NOT upgrade firmware via Wireless LAN due to high
error rate possibly and don't allow any other clients to access this unit during
updating procedure.
Be aware that you SHALL NOT turn off the power during updating the firmware
and wait for finish message.
Furthermore, the firmware upgrade procedure is always risky and do not try to
upgrade new firmware if it's not necessary.
System Restart:
The device is restarted without changing any of the network settings. It means the IP
address of the device will not change after firmware upgrade.
50/89