Honeywell HICC-P-3100IRV User Manual page 41

Network Camera User's Guide
White Balance:
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
Iris/Exposure Control:
Auto Iris: will adjust the DC Iris automatically.
This Camera is built-in a DC-Iris lens. In case, the "Auto Iris" mode is selected, the
Camera will control DC Iris automatically.
Sometimes, the Auto Iris may work abnormally under some environments. In this case,
user can click "Calibrate" button to adjust Auto Iris function again.
Auto Exposure: will adjust the image sensor exposure automatically.
Hold Exposure: will hold the exposure setting.
Manual Exposure: User can configure sensor exposure to fixed setting.
Outdoor: In case this camera is installed in outdoor, then shall enable this option.
Otherwise, disable it. The feature can improve auto-exposure performance under strong
sunlight.
Maximum Exposure Time:
Set the Maximum Exposure Time. However, the real exposure time may be shorter if
good light condition.
Power Frequency:
Frequency of power line: 50 or 60Hz.
Exposure Value:
Exposure value is AE target value. This value is to adjust the integration, analog gain
and digital gain to achieve the target brightness value (Exposure Value).
This value is dependent to "Auto Exposure" only.
Color Level:
Large value will be colorful.
Hue:
Change the value will result to color tuning.
Brightness:
Large value will brighten camera.
Contrast:
Large value will contrast camera heavily.
Sharpness:
Large value will sharpen camera.
41/89