Integra DHC-80.6 Advanced Manual page 36

Name Edit
Set an easy name to each input. The set name will be shown on the main unit display.
Setting Item Default Value
Name Input name
r To name a preset radio station, press Tuner on the remote controller, select AM/FM and select the
preset number.
r It cannot be set if the input is "NET" or "USB".
36
Setting Details
1. Select a character or symbol with the cursors
and press Enter.
Repeat it to input 10 or less characters.
"Shift": Switches between upper and lower
cases. (Pressing +10 on the remote controller
also toggles between upper and lower cases.)
" " " ": Moves the cursor to the arrow
direction.
"Back Space": Removes a character on the
left of the cursor.
"Space": Puts a space.
r Pressing CLR on the remote controller will
remove all the input characters.
2. After inputting, select "OK" with the cursors
and press Enter.
The input name will be saved.
Picture Adjust
Adjust the image quality. If you adjust it by checking the video, press Enter. Press Return to
return the screen to the previous status.
Setting Item Default Value
Wide Mode Auto
Advanced Settings
Setting Details
Set the aspect ratio.
"Auto": The aspect ratio will automatically be set
according to the input signals and the monitor
output setting.
"4:3":
"Full":
"Zoom":
"Wide Zoom":
r When a 3D or 4K video source is input, this
setting is set to "Full". Furthermore, for some
resolutions, this setting may be disabled and
set to "Full".