Integra DHC-80.6 Advanced Manual page 34

Dolby
Make the settings for Dolby listening mode.
Setting Item Default Value Setting Details
Loudness On Enable the Late Night function that allows you to enjoy
Management surround sound of Dolby TrueHD playback even in low
volume.
"On": Use this function
"Off": Do not use this function
Center Spread Off Adjust the width of the front sound field created during
Dolby Surround listening mode playback.
"On": The sound field is spread to left and right.
"Off": The sound field is centralized.
r The setting will be fixed to "Off" if "Speaker
DTS
Make the settings for DTS Neo:X Music listening mode.
Setting Item Default Value
Neo:X Music 2
Center Image
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Setting Item Default Value
Listening Angle Wide
r Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide"
is selected.
34
Configuration" - "Center" is set to "None".
Setting Details
Adjust the width of the sound field of the front
channel when playing in the DTS Neo:X Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center while
selecting a larger value spreads the sound field of
the front channel to left and right.
Setting Details
Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
LFE Level
Set the low-frequency effect (LFE) level of the Dolby Digital, DTS, Multichannel PCM, Dolby
TrueHD, DTS-HD Master Audio and DSD signals.
Setting Item Default Value
Dolby Digital/ 0 dB
&QND[|&KIKVCN|2NWU
DTS/DTS-HD 0 dB
Highresolution Audio
Multich PCM 0 dB
Dolby TrueHD 0 dB
DTS-HD Master 0 dB
Audio
DSD 0 dB
Advanced Settings
Setting Details
Select the low-frequency effect (LFE) level of
GCEJ V[RG QH UKIPCN HTQO F$ VQ  F$  +H VJG
low-frequency effect sound is too strong, select
F$ QT  F$ 
r This setting works on LFE channel volume of
Dolby Digital and Dolby Digital Plus sources.
Select the low-frequency effect (LFE) level of
GCEJ V[RG QH UKIPCN HTQO F$ VQ  F$  +H VJG
low-frequency effect sound is too strong, select
F$ QT  F$ 
r This setting works on LFE channel volume of
DTS and DTS-HD High Resolution sources.
Select the low-frequency effect (LFE) level of
GCEJ V[RG QH UKIPCN HTQO F$ VQ  F$  +H VJG
low-frequency effect sound is too strong, select
F$ QT  F$ 
Select the low-frequency effect (LFE) level of
GCEJ V[RG QH UKIPCN HTQO F$ VQ  F$  +H VJG
low-frequency effect sound is too strong, select
F$ QT  F$ 
Select the low-frequency effect (LFE) level of
GCEJ V[RG QH UKIPCN HTQO F$ VQ  F$  +H VJG
low-frequency effect sound is too strong, select
F$ QT  F$ 
Select the low-frequency effect (LFE) level of
GCEJ V[RG QH UKIPCN HTQO F$ VQ  F$  +H VJG
low-frequency effect sound is too strong, select
F$ QT  F$ 
r This setting works on LFE channel volume of
DSD (Super Audio CD) sources.