Zte Blade C2 User Manual page 45

3. Touch > Rename phone.
4. Edit the name and touch Rename.
Pair With a Bluetooth Device
1. Touch Home > Apps > Settings > Bluetooth.
2. Slide the Bluetooth switch to the ON position.
3. Your phone searches and displays the available Bluetooth
devices in range.
4. Touch the device you want to pair with.
Follow the instructions to complete the pairing. If you're prompted
to enter a passcode, try entering 0000 or 1234 or consult the
documentation that came with the other device.
Notes for pairing PBAP Enabled Devices
PBAC is Phonebook Access Profile which will automatically transfer
your Contacts to the other device.
During the Pairing process it is normal for Android handsets to
Automatically Connect the Bluetooth device as part of the Pairing
process. After the handset and Bluetooth device have successfully
connected you should continue to watch the handset display for a
further prompt or notification that is asking you to Allow Phone
Book Contacts to be transferred to the Bluetooth device you have
just connected. This will occur if the Bluetooth device in question
supports PBAP or "Phone Book Access Profile". If you miss this
prompt or notification then you will more then likely get prompted
to allow it the next time you connect the Bluetooth device to the
handset or you might need to re‐pair the handset and Bluetooth
device to trigger the PBAP request again. See your Bluetooth
device user manual for more information on what it supports and
45