Packing Check List; Installation Of Fire - Flavel Firenza FFIRR0MN Installation And Maintenance Instructions Manual

2.1

PACKING CHECK LIST

1 off Firebox / Burner Assembly
1 off Flue Spigot
1 off Closure Plate
1 off Literature / Loose Items Pack
4 off Ceramic Radiants – Packed inside combustion chamber of fire
2.2

INSTALLATION OF FIRE

2.2.1 Preparation.
a) Remove the dress guard by springing the location wires out at the top
and lifting away. See Fig. 2. Take care not to scratch the case.
Fig. 2 Remove the Dress Guard.
b) Remove the two case fixing screws, located underneath the bottom
edge of the case.
c) Remove the flue spigot restrictor if the fire is to be fitted to a pre cast
flue.
The flue spigot restrictor is attached to the fire back with two screws.
d) Fit the flue spigot to the back panel using four screws provided.
9