Specifications; Product Identification; Engine; Mower - Jacobsen Greens King 500A Series Technical Manual

2

SPECIFICATIONS

2 SPECIFICATIONS
2.1

PRODUCT IDENTIFICATION _________________________________________________

63281............................ 18 in. (457 mm) Greens King 518A
with InCommand™ control system,
Honda 4.0 H.P. gasoline engine
and 11 blade reel.
63287............................ 18 in. (457 mm) Greens King 518A
with InCommand™ control system,
Honda 4.0 H.P. gasoline engine
and 15 blade reel.
63282............................ 22 in. (559 mm) Greens King 522A
with InCommand™ control system,
Honda 4.0 H.P. gasoline engine
and 11 blade reel.
63288............................ 22 in. (559 mm) Greens King 522A
with InCommand™ control system,
Honda 4.0 H.P. gasoline engine
and 15 blade reel.
63285............................ 26 in. (660 mm) Greens King 526A
with InCommand™ control system,
Honda 4.0 H.P. gasoline engine
and 7 blade reel.
2.2

ENGINE__________________________________________________________________

Engine.............................. Honda GX-120 K1Q JG2 4-Cycle,
Speed .............................. High Idle - 3000 ± 100 RPM
Fuel .................................. Regular Grade (Unleaded)
Fuel Tank ......................... 0.66 Gallon (2.5 liter)
2.3

MOWER _________________________________________________________________

Reel ................................. 7, 11, or 15 blades, hardened
Reel Diameter .................. 5 in. (127 mm)
Cutting Width ................... 18-1/4 in. (457 mm), 22 in.
Cutting Frequency:
7 Blade........................0.250 in. (6.3 mm)
11 Blade......................0.169 in. (4.3 mm)
15 Blade......................0.124 in. (3.1 mm)
Height of cut..................... 5/64 to 7/16 in. (2 to 11 mm)
6
4HP (2.98 kW) at 4000 RPM
Low Idle - 1700 ± 100 RPM
high manganese carbon steel.
(559 mm), 26 in. (660 mm)
Serial Number ..............An identification plate, like the one
shown, listing the serial number, is
attached to the rear cross member
of the frame.
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
PRODUCT OF U.S.A.
95
kg
63281001651
Use clean, fresh, regular unleaded gasoline, 85 octane
minimum. When using blended fuel, do not use a blend
with more than 10% ethanol.
Under no circumstances should you use a blend with
methanol.
Bedknives ........................ Hardened carbon steel
High Profile ................. Yields 5/32 in. (4 mm) cut
Low Profile.................. Yields 7/64 in. (2.8 mm) cut
Super Tournament ...... Yields 1/16 in. (1.6 mm) cut
Reel Clutch ...................... Cog Type
® 11524 WILMAR BLVD,
CHARLOTTE, NC 28273
A Textron Company
1-800-848-1636 (US)
2.6 XXXX
kW
(Standard on 63285)
(Standard on 63281, 63282,
63287, 63288)