Assembly Prior To Installation; Control Of Functions; Mounting Of Flue Pipe; Connection To Chimney - Jøtul F 400 Installation And Operating Instructions Manual

ENGLISH

Assembly prior to installation

fig. 2a
(2b).
Control of functions (fig. 3)
Draught vent (A)
Doorhandle (B)
Ash door (C)
Note! Only remove the ashes when the stove is cold.

Mounting of flue pipe

This must be an approved thickness.
400
rear flue outlet is preferred, loosen the two screws on the
sides and rotate the connecting pipe 180
the screws securely.
(fig. 4-A).
fig. 1
0
. Then fasten
Note! It is important that the joints are completely sealed.

Connection to chimney

Operating instructions

Initial lighting and daily use

400

Initial lighting

If a
Note! Odors when using the stove for the first time.
Painted products.
fig. 1

Control of functions.

(fig. 3-A)