Westinghouse PPL776 Owner's Manual page 27

C O O K I N G W I T H Y O U R T I M E R
Using Fast Heat (Fast Heat Up) mode
To quickly and efficiently preheat your oven, it is recommended to select the "Fast Heat" cooking
feature.
1. Ensure the appliance is on by pressing the "On / Off" button. The oven lights will light.
2. Select the desired oven function by pressing the "Function" button.
3. Set the cooking temperature by pressing the
temperature.
NOTE: The temperature can only be adjusted when the degrees symbol "°" is flashing. The
temperature setting changes in increments of 5 °C.
4. Press the "Fast Heat" button. The letters "FHU" will appear on the temperature display.
5. When the set temperature is reached the buzzer will sound and the set temperature will be
displayed.
NOTE: "FHU" cannot be selected if the oven centre temperature is above the preset
temperature.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be switched on.
1. Switch off the appliance using the "On / Off" button.
2. Press the "Function" and
The child-proof lock is now engaged.
NOTE: When the child-proof lock function is active the time of day and minute minder can only be set.
Releasing the child-proof lock
1. Press the "Function" and
from the display. The child-proof lock is now released and the oven is ready to use.
Beep on touch
The beep sound can be activated anytime when a button is pressed.
1. Ensure the oven is off by pressing the "On / Off" button.
2. Press the "Function" and
confirm the operation. Repeat the above procedure to reset the beep on touch mode. As
default the beep on touch mode is off.
Demo mode
This mode is intended to be used in retail shops to demonstrate the oven functionality without
any power consumption except the oven lamps.
1. To activate this feature the appliance should be in stand-by mode.
2. Press and hold "Fast Heat" and
the appliance is initially turned on the letter "d" will appear in the left hand corner of the
display to confirm that the appliance is in demo mode. All functions can be selected, but the
thermometer icon will not flash. Repeat the above procedure to deactivate the demo mode.
Safety cut-out feature
The oven automatically switches itself off if the temperature is not adjusted or the appliance is
left operating after a period of time. The oven switches itself off at temperatures between:
• 30 less than 120°C after 20 hours
• 120 less than 200°C after 8.5 hours
• 200 less than 250°C after 5.5 hours
• 250 less than 280°C after 1.5 hours
or
buttons at the same time, hold until the word "SAFE" is displayed.
buttons at the same time, hold until the word "SAFE" is cleared
buttons simultaneously for 2 seconds, a single beep will sound to
buttons for 2 seconds, the appliance will beep once. When
buttons to decrease or increase the
27