Setting Up The Control Head (Setup Menu) - Humminbird Fishin' Buddy MAX Operation Manual

Setting up the Control Head
Use the Setup Menu to customize the settings of your unit.
Down Imaging View Settings: If you have a Down Imaging model, set
the Contrast and Palette for the Down Imaging Display.
Sonar View Settings: Set how fish are displayed on-screen (Fish ID+)
and the Bottom View.
Control Head Settings: Set the units of measurement, language
(international units only), and more.
Alarms: See the Setting Alarms section for information.
Open the Setup Menu
1. Press the POWER/MENU key.
2. Press the UP or DOWN Arrow key to select SETUP, and press the
CHECK/ENTER key.
Open the Units Submenu
1. Press the POWER/MENU key.
2. Press the UP or DOWN Arrow key to select SETUP, and press the
CHECK/ENTER key.
3. Select UNITS, and press the CHECK/ENTER key.
Menu options are determined by your Humminbird model and the selected
view. See the following pages for menu descriptions. Also, see Using the
Menu System and Changing the On-Screen View for more information.
Setting up the Control Head
10
(Setup Menu)