3Selecting A Paper Size Setting - Konica Minolta bizhub C203 User Manual

Using copy functions
2.11.3 Selecting a Paper Size setting
The paper size can be set for the paper tray so that it can be used with the
specified paper size.
Note
For details on loading paper, refer to the User's Guide [Copy Operations].
The paper size can be selected for the bypass tray in any of the following ways.
Setting
*1
Auto Detect
*2
Metric Sizes
*2
Inch Sizes
*2
Other
*3
Custom Size
*1*4
Wide Paper
*1
Settings can be specified for trays 1 and 2. When the optional single paper
feed cabinet or double paper feed cabinet is installed, settings can be also
specified for trays 3 and 4. In addition, [12-1/4×18 w] is available for the
tray 2.
*2
If paper other than the specified paper size is loaded, a paper misfeed may
occur since the paper size is not automatically detected.
*3
In order to specify a custom paper size in Enlarge Display mode, the
custom paper size must first be stored before entering Enlarge Display
mode. For details, refer to the User's Guide [Copy Operations].
*4
Wide paper is a size larger than the standard size and allows copies of
standard-sized originals to be printed so that there is no loss at the edges.
For example, if 11 × 17 wide (A3 wide) paper is used, an area up to 12-1/4
inch × 18 inch (311.1 mm × 457.2 mm) can be printed, allowing the entire
area of an 11 × 17-size (A3-size) original to be printed.
The following procedure describes how to specify the size of the paper loaded
into the bypass tray.
C353/C253/C203
Description
Select this setting to automatically detect the size of the paper loaded
into the bypass tray.
A metric paper size can be set so that the paper tray is used specifically
with the selected paper size.
A paper size in inches can be set so that the paper tray is used
specifically with the selected paper size.
A paper size other than the preset metric and inch sizes can be set so
that the paper tray is used specifically with the selected paper size.
A custom paper size can be set so that the paper tray is used
specifically with the selected paper size.
A wide paper size can be set so that the paper tray is used specifically
with the selected paper size.
2
2-36