Recalling Previous Job Settings - Konica Minolta bizhub Pro C6500 User Manual

13
13.5

Recalling Previous Job Settings

Follow the procedure below to copy with a previous job settings.
Prerequisites
0 Only the last-completed output job settings can be recalled as the
previous job settings. Non-completed job or reserve job settings cannot
be recalled, even if the setting operations have been made last.
0 The previous job settings can be recalled even after the machine power
is turned off then on.
1
Position the original.
2
Press [Mode Memory] on the control
panel.
The Mode Memory Screen will be
displayed.
3
Touch [Pre-Job Recall].
The [Job Check] key will be active on the screen.
13-16
Advanced Information
bizhub PRO C6500