Paper Setting - Konica Minolta bizhub Pro C6500 User Manual

Basic Job Settings
9.6

Paper Setting

Each paper tray has been preset with paper size and other specifications.
The setting items are as follows:
- Paper Type
- Name
- Weight
- Both Sides Adjustment
- Speed Setting
- Hole-Punch
- Colored Paper
- Air Assist (Tray 4 and 5 of Paper Feeder Unit PF-601 only)
Paper size
The machine can be set to detect the standard paper size when loaded or to
accommodate a specific size (custom size or tabbed paper size).
The tray specified as Standard or Tab Paper allows Auto Paper Select, Auto
Zoom, and Rotation to function.
The tray specified as Custom cannot be used when these functions are ac-
tivated.
Paper specifications
Various paper specifications can be set on each tray in the User Setting.
Those specifications can also be registered as desired.
Using [Paper Setting] on the Copy Screen, the selection for each can be al-
tered temporarily or preset specifications can be recalled.
Adjusting fixing pressure of fixing unit
If printed image on large-sized paper becomes rugged, or image duplex-
printed on small-sized thick paper shows unevenness, adjust fixing pressure
of the fixing unit to make improvement on it.
!
Detail
[Paper Setting] on the Copy Screen also allows you to register the paper
specifications. For details of setting procedure, see page 1-5, 2-3, or 5-9
of POD Administrator's reference.
The following describes how to use Auto Paper Select, Auto Zoom, and Ro-
tation functions, and how to temporarily change the paper size and other
specifications registered for each tray as well as to recall preset specifica-
tions.
bizhub PRO C6500
9
9-39