Samsung mini DVM Series Service Manual page 121

Disassembly and Reassembly
No Parts
4 Electrical Parts
(Main PCB)
5 Fan Motor
&
Cross Fan
4-59
Procedure
1) Loosen 4 fixing screws of right Holder
control.
2) Take all the connector of PCB upper side
out.(Including Power Cord)
3) Detach the outdoor unit connection wire
from the Terminal Block.
4) Pull the PCB up to detach.
1) Loosen 2 fixing screws and detach the
Motor Holder.
2) Loosen 1 fixing screw of Fan Motor.
3) Detach the Fan Motor from the Fan.
4) Detach the Fan from the left Holder
Bearing.
Remark
Samsung Electronics