Onkyo K-185X Instruction Manual page 14

CD dubbing (System operation)
CHR-185X
CD CHANGER TUNER AMPLIFIER
1
EJECT
2
3
CR-185X/CHR-185X
4
5
CR-185X/CHR-185X
14
CR-185X
CD TUNER AMPLIFIER
4
B
DOLBY NR
C
REVERSE
MODE
Label side
ALBUM
CD
DUBBING
FADE
or
4
K-185X
ALBUM and FADE OUT CD
dubbing
1. Insert the cassette.
Make sure the side to be recorded is
facing outward.
2. Set the Dolby NR by pressing the
DOLBY NR button repeatedly until
the desired Dolby NR indicator (B or
C) turns on or off.
3. Press the REVERSE MODE button
if you wish to select the auto reverse
mode.
" b " turns off: Only one side of the
tape is recorded.
" b " turns on: Both sides of the tape
are recorded.
4. Place the disc you would like to
record.
If you have stored the desired tracks of
the CD using the CR-185X/CHR-185X
CD receiver's memory feature, you can
perform CD dubbing with the stored
tracks.
5. Press the ALBUM or FADE button.
• The CD player performs peak search,
and the tape is automatically rewound
to the beginning if it is not been
completely rewound, and the recording
level is automatically set to the
optimum level.
• This unit creates a blank space of about
10 seconds and CD dubbing starts.
Notes:
• If the CD player or cassette deck is not
set correctly, you will not be able to use
the CD dubbing functions.
• In some cases, one track of music on a
CD of live or classical music may be
too long to be recorded on one side of a
tape. In this case, do not fade-out or
erase at the end of the tape but keep
recording to the end of the tape.
Stopping CD dubbing
Press the e button on the CD player or
this unit.
1
3
2
5