Viewing The Photos And Videos - Bushnell 119734C Instruction Manual

After your camera has been operating for awhile, you will of course want
to review the photos and/or videos it has been capturing. This can be
done by either of two methods, according to your preference or the
availability of accessory equipment:
Using an SD Card Reader
• Push the SD card in slightly to release it then pull it out gently.
• Put the SD card into any of the widely available SD card readers
(either a dedicated SD card reader or "multi-card reader" that
features slots for several different memory cards, including SD cards.
• Follow the card reader supplier's directions to view or download the
photo and/or video files on the SD card.
Connecting the Camera to Your Computer via USB
• Slide the Power switch to the "ON" position (camera will be in Setup
mode).
• Connect your camera's USB port (left side near the display with
camera unlatched and open) to a PC or Mac computer with a USB
cable (not included, available at most electronics/computer retailers)
that has a "Mini-B" USB plug on one end (camera) and a "Standard-A"
USB plug at the other end (computer).
• The PC will recognize the camera as an external storage device,
using the "USB Mass Storage" standard (no driver installation
necessary-not compatible with Windows 98 or earlier).
• The PC will display a new disk symbol under "My Computer" or in
Windows Explorer (Macs-new disk appears on the desktop), and you
will see a dialog window on your desktop with several options to
view, move, or copy the photo and video files that are stored on
the SD card.
• The camera's LCD will display "STOR" , meaning the camera is in
mass storage mode.
14

VIEWING THE PHOTOS and VIDEOS