Table of Contents
Advertisement
7. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and the vehicle is running.
Step 3: Activate and Mount
the Speech Recognition
Remote Control
Pull the clear tab out of the remote control to
activate it.
Mount the remote control in a convenient
location in your vehicle, such as on your
steering wheel. Use the strap to secure the
remote control in place.
5
Step 4: Configure the nuvi
To tum on your niivi, slide the
6
Power
key to the left and let go after one second.
Follow the on-screen instructions.
Step 5: Acquire Satellites
Go outdoors to an open area, out of garages,
and away from tall buildings. Stop your
vehicle, and tum on the niivi. Acquiring
satellite signals may take a few minutes.
The _
bars indicate GPS satellite
strength. When one bar is green, the niivi
has acquired satellite signals. Now you can
select a destination and navigate to it. For
more information about GPS, visit
www.garmin.com/aboutGPS.
Advertisement
Table of Contents
