Label - Konica Minolta magicolor 1600W User Manual

Layered
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn
Too slick, too coarse, or too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
You can print continuously with thick stock. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Capacity
Orientation Face up
Driver
Media Type
Weight
DO NOT use thick stock that is
Mixed with any other media in the trays (as this will cause printer misfeed-
ing)
4-4
2 (24 lb bond) is referred to as thick stock. Test all
Tray 1 Up to 50 thick stock sheets, depending on
their thickness
Thick Stock 1
Thick Stock 2
Thick Stock 1: 91 to 163 g/m
Thick Stock 2: 164 to 209 g/m
2
(25 to 43.5 lb bond)
2
(43.6 to 55.6 lb bond)
Types