Changing The Display - Sony STR-DE590 Operating Instructions Manual

Selecting the component
(continued)
SPEAKERS (OFF/A/B/A+B)
Press SPEAKERS (OFF/A/B/A+B) to output
the sound from the speakers connected to the
SPEAKERS FRONT terminals.
Each time you press the button, the display will
light up cyclically as follows:
SP A t SP B t SP A and SP B t
No display*
To drive
Speaker System A
(Connected to the
SPEAKERS FRONT A
terminals)
Speaker System B
(Connected to the
SPEAKERS FRONT B
terminals)
Both Speaker System
A and B
(Connected to the
SPEAKERS FRONT A
and B terminals)
* If you do not want to drive Speaker System A and
B, press SPEAKERS (OFF/A/B/A+B) until "SP A"
and "SP B" do not light up in the display (no
display).
GB
22
Select
SP A (default setting)
SP B
SP A and SP B

Changing the display

DISPLAY
Each time you press DISPLAY, the display
changes cyclically as follows:
Index name of the component* t Selected
component t Sound field applied to the
program source
When the tuner is selected
Index name of the preset station* t
Frequency t Sound field applied to the band
or the preset station
* Index name appears only when you have assigned
one to the component or preset station (page 31).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input selector.