Make a note of equipment or other property. this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative NOTE or service department. Draws attention to an instruction or other useful informa- tion.
Take the influences of the surrounding area into account. Do not use the tool where there is a risk of fire or The Hilti PMA 31 laser receiver is designed to detect the explosion. laser beams from the PMC 46 or PML 42 line lasers.
6.2 Working with the laser receiver is not projected at right angles to the wall or working The PMA 31 receiver can be used at distances of up surface. to 30m from the laser tool. The laser beam is indicated Switch the PMA 31 laser receiver on by pressing the visually and by an audible signal.
Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old tools and appliances for recycling.
Dispose of the batteries in accordance with national regulations. 9 Manufacturer’s warranty - tools Please contact your local Hilti representative if you have questions about the warranty conditions. 10 FCC statement (applicable in USA)
86916 Kaufering Deutschland We declare, on our sole responsibility, that this product complies with the following directives and standards: 2004/108/EC, 2006/95/EC, 2011/65/EU. Hilti Corporation, Feldkircherstrasse 100, FL‑9494 Schaan Paolo Luccini Matthias Gillner Head of BA Quality and Process Man- Executive Vice President agement Business Area Electric Tools &...