Milwaukee 48-59-2401 Operator's Manual

12v li-ion battery charger, 12v li-ion battery

Hide thumbs Also See for 48-59-2401:

Download this manual

Enlarged version

Cat. No.

No de Cat.

48-11-2401

12V Li-ION BATTERY CHARGER

12V Li-ION BATTERY

CHARGEUR AU LITHIUM-ION 12V

BATTERIE AU LITHIUM-ION 12V

CARGADOR PARA BATERÍAS DE IONES DE LITIO DE 12V

BATERÍA DE IONES DE LITIO DE 12V

TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE MANUEL DE

L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DEL

OPERADOR.

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

Cat. No.

No de Cat.

48-59-2401

New batteries must be charged before

ﬁ rst use.

Les batteries neuves doivent être char-

gées avant leur utilisation initiale.

Las baterías nuevas se deben cargar

antes de usarlas por primera vez.

Table of Contents

Page 1 OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. No de Cat. 48-59-2401 Cat. No. No de Cat. 48-11-2401 New batteries must be charged before ﬁ rst use. 12V Li-ION BATTERY CHARGER Les batteries neuves doivent être char- gées avant leur utilisation initiale.
Page 2: General Safety Rules
If it is damaged, inserted into the charger, the light will ging charger, pull plug rather than cord to take it to a MILWAUKEE service facility. indicate the following situations: reduce the risk of damage to the electrical 16.
Page 3: Specifications
ﬁ ve (5) years* after the date of purchase. Return the electric MILWAUKEE 12 V MILWAUKEE 12 V indicates that the battery temperature is outside power tool and a copy of proof of purchase to a MILWAUKEE factory Ser- vice/Sales Support Branch location or MILWAUKEE Authorized Service LITHIUM-ION BATTERY LITHIUM-ION CHARGER the charging range.
Page 4 • become a H club member EAVY MEXICO - Soporte de Servicio Canada - Service MILWAUKEE MILWAUKEE MILWAUKEE est ﬁ er de proposer un produit de pre- mière qualité N ® Votre satisfac- Milwaukee Electric Tool, S.A. de C.V. OTHING EAVY Blvd.
Page 5: Service Parts List
The solvent is to be applied with a clean, lint free applicator and the surface allowed to dry before applying the label or nameplate. MILWAUKEE ELECTRIC TOOL CORPORATION 13135 W. LISBON RD., BROOKFIELD, WI 53005 Drwg. 1...

48-11-2401