Assemble camera parts
The replacement camera assembly came in several parts. You need to connect the LCD cable to the
connector on the camera board and assemble the various parts before install it on the LCD module.
Step 1.
Connect the LCD cable with the camera board.
Figure 27. Connect with LCD cable
Step 2.
Install the camera assembly cover and secure it with screws.
Figure 28. Install camera cover
Step 3.
Paste the camera assembly mylar.
Figure 29. Paste camera mylar
Remove the hinges
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD bezel" on page 33
38
Hardware Maintenance Manual