Remove the LCD module
Make sure the following FRUs (CRUs) have been removed and the battery connector has been detached.
"Remove the upper case (with keyboard)" on page 25
"Remove the WLAN & Bluetooth combo module" on page 29
Step 1.
Open the socket and detach the LCD cable
a
Figure 13. Unplug the LCD cable
Step 2.
Remove the screws.
Figure 14. Remove 4 screws
Table 6. Screw specifications — removing the LCD module
Screw
Number Specifications
location
LCD to
4
base
cover
M2.5 ×54 mm, flat-head, nylon-coated
1
.
Chapter 4
Color
Torque
Black
3.7 – 4.0 kgf * cm
.
Removing a FRU or CRU
31