VTech T1200 User Manual page 14

4. Plug the other end of the power adapter back into
the mains power jack. Plug the other end of the
telephone line cord into a telephone wall jack or a
ADSL ilter.
5. Align the holes on the bottom of the telephone
base with the wall mounting plate, then slide the
telephone base down until it locks securely. Replace
the handset in the telephone base.
Adjust the viewing angle of the tilt display for
6.
maximum visibility.
1
A DSL ilter (not
included)
is required if
you have DSL
high-speed
Internet
service.
The DSL
ilter must be
plugged into
the telephone
wall jack.