Mounting The Bike Handle - Stihl FS 500 Instruction Manual

Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
For safety reasons only the
cutting attachment and deflectors
or limit stops shown in each row of
the table may be used together.
No other combinations are
permitted because of the risk of
accidents.
Cutting Attachments
Mowing heads
1 STIHL AutoCut 40-4
2 STIHL TrimCut 51-2
3 STIHL PolyCut 40-3
4 STIHL PolyCut 41-3
Metal cutting attachments
5 Grass cutting blade 255-8
6 Grass cutting blade 250-40
7 Brush knife 305-2
8 Brush knife 350-3
9 Brush knife 350-3 Spezial
10 Shredder blade 320-2
11 Scratcher tooth circular saw blade
225
12 Chisel tooth circular saw blade 225
13 Carbide tipped circular saw blade
225
14 Scratcher tooth circular saw blade
250
FS 500, FS 550
Non-metal grass cutting blades,
brush knives, shredder blades
and circular saw blades are not
approved.
Deflectors
15 Deflector with
16 Skirt and blade for mowing heads
only
17 Deflector without skirt and blade for
all metal mowing attachments and
brush knife, 5 to 9
18 Deflector for shredder blade
Limit stops
19 Limit stop for circular saw blades
225
20 Limit stop for circular saw blades
250
Harnesses
21 Full harness must be used
22 Deluxe full harness

Mounting the Bike Handle

3
2
4
1
N
Hold the lower clamp (1) steady.
N Unscrew and remove the clamp
screws (2) and hex head screw (3).
The clamps are loose once the hex
head screw has been removed.
N Remove the upper clamp (4) from
the lower clamp.
English
13