Transfer (Dubbing) From Vhs; One Touch Transfer (Dubbing) (Vhs L Dvd) - Panasonic DIGA DMR-ES30V Operating Instructions Manual

Transferring (Dubbing)

Transfer (Dubbing) from VHS

DVD/ VHS
TV
INPUT SELECT
AV
VHS
VHS VHS
SKIP/ INDEX
CANCEL/RESET
∫
TOP MENU
DIRECT NAVIGATOR
SUB MENU
TOP MENU
S
PROG/CHECK
DISPLAY
REC REC MODE
DUBBING DUBBING
" DVD
VHS DVD DVD
A B
VHS DVD
CH REC
/k1.3
DUBBING indicator
∫ One Touch Transfer (Dubbing)
(VHS l DVD)
You can transfer (dub) programmes recorded on a tape onto a disc°
with one stroke of the button.
In One Touch Transfer (Dubbing), programmes are automatically
transferred (dubbed) onto the disc from the location of playback at
the time when the transfer (dubbing) of the tape starts.
° Available discs for transfer (dubbing) from tape are [RAM] [-R]
[-RW‹V›] [+R].
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
VHS (Recording source)
≥Press [VHS].
≥Insert the video cassette containing the programme to be copied.
(l 48)
≥Press [AUDIO] to select the audio you wish to record.
≥Stop the tape at the position where you wish to start recording.
DVD (Recording target)
≥Press [DVD].
≥Release protection. (disc l 28, cartridge l 28) [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 8, 47)
≥Select the recording mode. (l 23)
Settings (l 42, TV System)
≥When transferring (dubbing) an NTSC tape to a DVD
- Set "TV System" on "Connection" in SETUP to "NTSC".
≥When transferring (dubbing) a PAL tape to a DVD
- Set "TV System" on "Connection" in SETUP to "PAL".
VOLUME
CH
OPERATION
DVD
DVD DVD
SELECT
TRACKING/V-LOCK
SLOW/
AUDIO AUDIO
REW SEARCH FF
AUDIO
G-Code
PLAY
FUNCTIONS
RETURN RETURN
RETURN
TIME SLIP
STATUS JET REW
DVD ERASE TIMER
CREATE
F Rec
CHAPTER
C
DUBBING
VHS DVD
[1]
While both DVD and VHS are stopped
Press and hold [" DVD, DUBBING] for about 3
seconds or more (until "START" on the unit's
display terminates flashing).
On the main unit, press [" DVD].
≥Check if transferring (dubbing) starts properly.
≥The "DUBBING" indicator on the main unit
lights.
≥Transferring (Dubbing) is automatically
completed when the tape reaches its end or
the disc becomes full.
∫ To stop transfer (dubbing) in the middle
Press [∫, STOP] or press and hold [RETURN] for about 3 seconds
or more.
Note
≥You cannot operate for transferring (dubbing) while timer recording
standby on both DVD and VHS. Cancel the timer recording
standby.
≥When the transfer (dubbing) is not started or not executed, the
"DUBBING" indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
∫ Dividing a title to be transferred (dubbed)
When transferring (dubbing) from VHS to DVD, the title is divided
by index signal (l 54) detected and then recorded. You can search
desired titles with Direct Navigator (l 31) after transfer (dub) to
DVD.
≥Titles recorded within 15 minutes of each other may not be
divided properly.
≥The recording time may become longer than the original title
depending on the number of index signals.
If you want to transfer (dub) without dividing the contents into
titles, follow the methods below.
≥Set "Time Setting" to "On" on the GUI Transfer (l 58).
≥Manual Transfer (l 59).
DVD VHS
57
VQT0P03