Transfer (Dubbing) From Vhs; One Touch Transfer (Dubbing) (Vhs L Dvd); Gui (Graphical User Interface) Transfer (Dubbing) - Panasonic DMR-ES30VS Operating Instructions Manual

Transferring (Dubbing)

Transfer (Dubbing) from VHS

DVD/VHS POWER
TV
POWER
INPUT SELECT TV/VIDEO
SKIP/INDEX
OPERATION
VHS
∫
DIRECT NAVIGATOR
TOP MENU
3, 4, 2, 1
ENTER
SUB MENU
S
REC REC MODE
SCHEDULE
DISPLAY
DUBBING DUBBING
" DVD
VHS DVD DVD
VHS DVD
CH REC
/k1.3
DUBBING indicator

∫ One Touch Transfer (Dubbing) (VHS l DVD)

[RAM] [-R] [-RW‹V›] [+R]
You can transfer (dub) programs recorded on a tape onto a disc° with
one stroke of the button.
In One Touch Transfer (Dubbing), programs are automatically
transferred (dubbed) onto the disc from the location of playback at
the time when the transfer (dubbing) of the tape starts.
° Available discs for transfer (dubbing) from tape are DVD-RAM,
non-finalized DVD-R, DVD-RW (DVD-Video format) and +R.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 8, 47)
≥Select the recording mode. (l 25)
≥When SAP broadcast program is played back on VHS, select the
audio to be recorded on disc in "Select MTS" in the "SETUP" menu.
(l 44) [-R] [-RW‹V›] [+R]
VHS
≥Insert the video cassette containing the program to be copied (l 48).
[1]
While both DVD and VHS are stopped
Press and hold [" DVD, DUBBING] for about 3
seconds or more (until "START" on the unit's
display terminates flashing).
On the main unit, press [" DVD].
≥Check if transfer (dubbing) starts properly.
≥The "DUBBING" indicator on the main unit
lights.
≥Dub is automatically completed when the tape
reaches its end or the disc becomes full.
∫ To stop transfer (dubbing) in the middle
Press [∫, STOP] or press and hold [RETURN] for about 3 seconds
or more.
VOLUME
CH
SLOW/
REW SEARCH FF
DVD DVD
DVD
SELECT
PLAY
TRACKING/V-LOCK
FUNCTIONS FUNCTIONS
FUNCTIONS
VHS MENU
RETURN RETURN
RETURN
DVD ERASE ADD/DLT
TIME SLIP
CREATE
STATUS JET REW
F.REC
CHAPTER
VHS DUBBING DVD
Note
≥While One Touch Transfer (Dubbing) is activated, a scheduled
recording cannot be started.
≥When the transfer (dubbing) is not started or not executed, the
"DUBBING" indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
∫ Dividing a title to be dubbed
In One Touch Transfer (Dubbing) from VHS to DVD, the title is
divided by index signal detected and then recorded. You can
search desired titles with Direct Navigator's Title View (l 33) after
transfer (dub) to DVD.
≥Titles recorded within 15 minutes (25 minutes in VP mode) of
each other may not be divided properly.
≥The recording time may become longer than the original title
depending on the number of index signals.
If you want to transfer (dub) without dividing the contents into
titles, follow the methods below.
≥Set "Time Limit" to "On" on the GUI transfer (l below).
≥Manual transfer (l 58).
∫ GUI (Graphical User Interface) Transfer
(Dubbing)
[RAM] [-R] [-RW‹V›] [+R]
You can transfer (dub) programs recorded on a tape onto a disc°° from
the location° of playback as of the transfer (dubbing) start of the tape.
° When you set the recording mode to "FR" and "Time Limit" to "Off",
you can transfer (dub) the whole tape from the beginning to the
end. (l 58)
°° Available discs for transfer (dubbing) from tape are DVD-RAM,
non-finalized DVD-R, DVD-RW (DVD-Video format) and +R.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 8, 47)
≥When SAP broadcast program is played back on VHS, select the
audio to be recorded on discs in "Select MTS" in the "SETUP"
menu. (l 44) [-R] [-RW‹V›] [+R]
VHS
≥Insert the video cassette containing the program to be copied (l 48).
[1]
Press [DVD].
[2]
While both DVD and VHS are stopped
Press [FUNCTIONS].
[3] Select "DUBBING" with [3, 4] and press [ENTER].
[4]
Set the transfer
(dubbing) direction.
≥"Set "Source" to "VHS".
≥If you are not going to change
the dub direction, press [4],
then skip to step 5.
∫ To change the setting
(1)Make sure "Dubbing Direction" is selected and press [1].
(2)Make sure "Source" is selected and press [ENTER].
(3)Press [3, 4] to select "VHS" and press [ENTER].
≥When you set "Source" to "VHS", "DVD" is automatically
selected on "Destination".
(4)Press [2].
(5)Press [4].
[5]
Set the recording mode.
≥If you are not going to change
the recording mode, press [4],
then skip to step 6.
∫ To change the setting
(1)Make sure "Mode" is selected and press [1].
(2)Make sure "Recording Mode" is selected and press [ENTER].
DVD VHS
DUBBING
Cancel All
Source
Dubbing Direction
DVD VHS
Destination
Mode
SP
VHS-Video
DUBBING
Cancel All
Format VHS-Video
Dubbing Direction
VHS DVD
Recording Mode SP
Mode
SP
VHS-Video
Time Limit
Off
57
VQT0N92