Step 1 Connection; Connecting A Tv - Panasonic DIGA DMR-ES30V Operating Instructions Manual

Getting started

STEP 1 Connection

≥Please read "Precautions". (l 3)
≥Before connection, turn off all equipment and read the appropriate operating instructions.

∫ Connecting a TV

(1)
∫ Do not connect the unit through a video cassette
recorder
Video signals sent through video cassette recorders will be affected
by copyright protection systems and the picture will not be shown
correctly on the TV.
TV
The unit
VCR
≥When connecting the unit to a TV with a built-in VCR, connect to
the input terminals on the TV, not the VCR.
∫ When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. The unit consumes a small amount of power even when it is turned off.
Standby power consumption
Quick Start (l 43)
≥When "Power Save" is set to "On", the "Quick Start" function does not work.
∫ Quick Start
(l 43)
1 Sec. Quick Start for Recording on DVD-RAM°
° From the power off state, recording on DVD-RAM starts about 1 second after first pressing the [Í, DVD/VHS] and then sequentially
pressing the [¥, REC] (Quick Start Mode).
14
VQT0P03
4
(2)
(5)
3
(4)
1
(3)
2
TV
VCR
The unit
Power Save (l 43)
On
On —
Off Approx. 4 W
∫ Connect as following steps
1 RF Coaxial cable (supplied)
2 Audio/Video cable (supplied)
3 Aerial lead (not supplied)
4 AC mains leads (supplied)
5 AC mains leads (not supplied)
Sockets
(1) Audio/Video Output sockets (DVD/VHS COMMON OUT)
(2) Aerial Input socket
5
(3) Aerial Output socket
(4) Aerial Input socket
(5) Audio/Video Input sockets
∫ Connection examples with other equipment
Amplifier (l 15)
The unit
For your reference
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables are sold separately
unless otherwise indicated.
Off
Approx. 15 W
Approx. 7 W
Video camera (l 65)
From the AUDIO/VIDEO OUT terminal
or the DIGITAL AUDIO OUT terminal
To AV3 input terminals (front)