Wall Mounting - BT quartet 1500 User Manual

Quartet 1500 User Guide – Edition 4.2 – 16.11.00

Wall mounting

Your Quartet 1500 can be
wall-mounted by removing the desk
bracket provided.
Please refer to page 45,
wall-mounting template.
Note
Before you wall-mount your
Quartet 1500, check that:
• the wall can support the weight
of the base unit and handset;
• the position you choose leaves
enough space so that the base
unit is clear of any obstruction
on the wall, such as a shelf or
cupboard. Room should be left so
that the handset can be placed
on charge without touching any
obstructions.
For the best operating conditions,
try to place the base unit away from
large metal objects and other
electrical appliances.
43
Drill 2 holes for the screws and
1
insert the wall-plugs provided
(if required).
WALL PLUG
WALL
Drive the screws into the wall,
2
leaving about 4mm free on which
to mount the bracket and base
unit.
Make sure that the power supply
3
and the telephone cables are
connected to the base unit, then
fit the cables into the channels on
the bottom of the base unit.
Attach the base unit by hooking it
4
over the screws protruding from
the wall.
70 mm