Wall Mounting - BT Freestyle 60 User Manual

Freestyle 60 User Guide ~ 2nd Edition ~ 9th July'01 ~ 3946

Wall mounting

Your Freestyle 60 can be wall-mounted
by removing the desk bracket.
To remove, just squeeze the bracket in
with thumbs and lift off as shown.
Please refer to page 25, wall-mounting
template.
Note
Before you wall-mount your
Freestyle 60, check that:
• the wall can support the weight of
the base unit and handset;
• the position you choose leaves enough
space so that the base unit is clear
of any obstruction on the wall, such
as a shelf or cupboard. Room should
be left so that the handset can be
placed on charge without touching
any obstructions.
For the best operating conditions, try
to place the base unit away from large
metal objects and other electrical
appliances.
Drill 2 holes for the screws and insert
1
the wall-plugs provided (if required).
WALL PLUG
WALL
Drive the screws into the wall, leaving
2
about 4mm free on which to mount
the bracket and base unit.
Make sure that the power supply and
3
the telephone cables are connected
to the base unit, then fit the cables
into the channels on the bottom of the
base unit.
Attach the base unit by hooking it over
4
the screws protruding from the wall.
Handset hook
Keeps the handset in place when the
Freestyle 60 is wall mounted.
Revolve the handset catch on the top of
the base unit. The handset will now be
able to rest on the hook when wall-
mounted.
70 mm
24