Ordering Spare Parts - Stihl MS 461 Instruction Manual

3/8" chains
Rapid Super (33 RS) Type 3623
Cutting lengths: 40, 45, 50 cm
Pitch: 3/8" (9.32 mm)
Drive link gauge: 1.3 mm
Rapid Super 3 (33 RS3) Type 3676
Cutting lengths: 63, 71, 80, 90 cm
Pitch: 3/8" (9.32 mm)
Drive link gauge: 1.3 mm
Chain sprockets
7-tooth for 3/8" (rim sprocket)
Cutting Attachment (MS 461 rescue
saw)
The actual cutting length can be less
than the specified cutting length.
Rollomatic ES guide bar
Bar lengths (3/8"
pitch): 50 cm
Groove width: 1.6 mm
3/8" chain
Rapid Duro 3 (36 RD3) Type 3944
Pitch: 3/8" (9.32 mm)
Drive link gauge: 1.6 mm
Chain sprocket
7-tooth for 3/8" (rim sprocket)
MS 461
Other cutting attachments
Other cutting attachments complying
with CSA Standard Z 62.3 are available:
see section CSA Standard Z 62.3, the
"Chain Leaflet" inside the chain box or
contact your local STIHL dealer.
Please ask your STIHL dealer to
properly match your powerhead with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.

Ordering Spare Parts

Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make re-
ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
Model
Serial number
Guide bar part number
Chain part number
English
47