Security Menu - Panasonic CF-52 Series Reference Manual

Setup Utility

Security Menu

Execute-Disable Bit Capability
• [Enable] indicates that this computer supports hardware-based Data Execution Prevention (DEP).
Password on boot
SD Startup
• Only when [Password on boot] is set to [Enable] and one or more SD card is registered.
SD Setting Method
• Only when [SD Startup] is set to [Enable]
Clear registered SD card
• Only when one or more SD card is registered.
Set Supervisor Password
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disable], the message "Press F2 for Setup / F12 for LAN" is not displayed on
[Panasonic] boot screen. However, F2 and F12 will work even if the message is not displayed.
Boot First Menu
Hard Disk Lock
User Password Protection
Set User Password
DVD Operation
Embedded Security (TPM) Sub-Menu
• For information on TPM, refer to the Installation Manual of "Trusted Platform Module (TPM)".
Click [start] - [Run] and input [c:\util\drivers\tpm\readme.pdf], and click [OK].
Fingerprint Security Sub-Menu
• Only for model with Fingerprint Reader
Computrace (R) Sub-Menu
67
Underlined items are the factory presets.
Disable
Enable
Disable
Enable
Disable
Enable
Leave Set
Set and Eject
Enter the sub-menu.
Enter the sub-menu.
Disable
Enable
Disable
Enable
Disable
Enable
No Protection
Protected
Enter the sub-menu.
Disable
Enable
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.