Pc Card / Expresscard - Panasonic CF-52 Series Reference Manual

PC Card / ExpressCard

You can insert the following cards.
ExpressCard/34 or ExpressCard/54 to the ExpressCard slot (A)
(Only for model with ExpressCard slot)
PC Card Type I (3.3 mm) or II (5.0 mm) to the PC Card slot (B)
NOTE
The following types of card are not supported:
PC Card Type III (10.5 mm), ZV card, SRAM card, FLASH ROM card (excluding ATA interface type), and other cards
that require 12 V of operating voltage.
Inserting/Removing the Card
Preparation
Before connecting a card, first determine the media that contains the card driver (e.g., CD-ROM), then attach the
device for that media to the multimedia pocket. Once the installation screen for the card's driver appears, equipment
you then connect to the multimedia pocket will not be recognized.
If the dummy card is inserted, remove it.
To insert the card
1
Open the cover (C), and insert the ExpressCard (D) or the PC
Card (E) with the label side up until it securely fits in to the slot.
For further information, refer to the instruction manual of the card.
To remove the card
1
Disable the card function.
Double-click
A
Follow the on-screen instructions.
B
This step is not necessary when removing the card after turning off the com-
puter.
on the notification area and select the card, then click [Stop].
32