Connecting Lan - Panasonic CF-52 Series Reference Manual

LAN

Connecting LAN

CAUTION
Do not connect the telephone cable to the LAN port.
1
Turn off the computer.
Do not use standby or hibernation.
2
Open the cover (A) and connect the cable.
Connect the LAN port (B) and the network system (server, HUB, etc.) using a LAN cable.
3
Turn on the computer.
To check the Local Area Connection status
Click [start] - [Connect To] - [Show all connections].
A
Power On by LAN/Wake Up from LAN
NOTE
When this function is enabled, power is consumed even the computer is in standby, hibernation, or powered off. Be
sure to use the AC adaptor.
Even when a password is set in the Setup Utility and [Password on boot] is set to [Enable], entering the password is
unnecessary for turning on or resuming the computer.
This function is off under the following conditions:
• When you turn the computer off by pressing the power switch for four seconds or longer (e.g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
The screen remains dark after the computer resumes from standby. The previous screen display will be restored when
you touch the keyboard or touch pad.
52