Mixing Fuel - ALDI 53942 User Manual

45cc Petrol Chainsaw
Mixing Fuel (40:1 mixing ratio)
Mixing ratio is 40:1
IMPORTANT. Use good quality air cooled 2-stroke engine oil.
This product is powered by a 2-stroke engine and requires pre-mixing fuel
with 2-stroke oil.
1 litre of petrol and 25 mls of 2-stroke oil
OR 5 litres of petrol and 125 mls of 2-stroke oil
1. Use fresh unleaded fuel. Do not use ethanol based fuels . You must use
2-stroke oil specifically made for heavily stressed two-stroke engines.
2. Mix the fuel and oil in an approved container. Never mix fuel and oil
directly into the fuel tank (8). Use the supplied fuel mixing container (32)
included with this product (Fig O).
3. Using the supplied fuel mixing container (32),
fill with fuel to the 1:40 mark, then fill with 2
stroke oil to the 600ml marking (Fig P).
WARNING. Never use any type of
pre-mixed fuel/oil direct from fuel
stations. This may include special blends
intended for use in mopeds, motorcycles, etc.
4. Mix the fuel and oil thoroughly and also each
time before fuelling.
5. Always pre-mix in small quantities. Never mix quantities larger than what
will be used in a 30-day period.
NOTE: The fuel mixing container
(32) provided is NOT for the
storage of fuel.
This container is solely for mixing
of fuel and oil only. Ensure to
keep this container in a safe
storage location, empty of fuel
and out of reach of children.
AFTER SALES SUPPORT
1800 909 909
(toll free)
Filling up with Fuel and Oil
O .
P.
e-mail: help@powertoolsupport.com
MODEL: №. 53942 • 10/2016 • YR-4503
2 STROKE OIL
FUEL
17