Page 1
User Manual 53942 45CC PETROL CHAINSAW Product Info www.powertoolsupport.com Read all safety warnings and all instructions thoroughly before operating this product. Ensure you keep your manual in a safe place for future reference. IM ED 8 10/2016...
Page 2
Try it out now Just scan the QR code with your smartphone and Product find out more about the Aldi product you have Info purchased*. * Depending on your tariff you may be charged for the connection.
Contents Intended use of the 45cc Petrol Chainsaw Contents of carton Description of Symbols General Safety Warnings Additional Safety Rules for Petrol Chainsaws Parts List Changing / Replacing the Guide Bar and Chain Filling up with Fuel and Oil Mixing Fuel Fuelling the Chainsaw Adding Chain Oil Starting the Chainsaw...
Description of symbols The instruction manual, rating plate, or on the product itself, may show these symbols. These represent important information about the product or instructions on its use. Conforms to relevant standards for electromagnetic compatibility. Wear hearing protection, eye protection and headwear protection. Wear safety footwear.
General safety warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in fire and/or serious injury. The word power tool used in the following warnings and throughout this manual refers to BOTH electrical power tools and ALSO petrol driven power tools.
Page 7
2. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Page 8
General safety warnings 3. Power tool use and care a. Do not force the power tools. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b.
4. Power tool use and care a. Do not force the power tools. Use the correct power tool for your Additional safety rules for Petrol Chainsaws application. The correct power tool will do the job better and safer at the rate for which it was designed. a.
Page 10
• Ensure you use a 2-stroke oil / unleaded fuel mix making sure that you mix 40 parts unleaded fuel to 1 part 2-stroke oil. If not, the engine will overheat and cause damage to your chainsaw. We recommend ALDI GARDENLINE Synthetic 2 Stroke Oil.
(38). The guide bar (19) is then removed NOTE: SIDE VIEW FLAT LOOSEN TIGHTEN AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Page 15
(19) is NOT tight on the chain (20). When replacing the existing chain, rotate the adjustment screw 5 TIGHTEN FULL turns. LOOSEN AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Page 16
(22), in a clockwise direction (previous Fig K) until the links of the chain just touch the bottom edge of the guide bar (19). AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Page 17
(flat blade screwdriver) (33) (Fig N). Run the chainsaw for approximately 30 seconds and then turn the chainsaw off. Retest the chain. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
(8), clean it then run the engine at idle to empty the carburettor. NOTE: Do not discard an unwanted fuel container with household waste. It must be taken to an authorised repository site. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Ensure to FUEL keep this container in a safe storage location, empty of fuel and out of reach of children. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
2. Using a funnel, fill the oil tank (6) to 80% capacity with chain oil (Fig T). 3. Fasten the oil tank cap (7) and wipe up any oil spillage. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
(11) (Fig Z). Repeat (up to 15 times for first time operation as fuel needs to be drawn through the full fuel system). AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
(19) and chain (20). NOTE: For first time use the oil may take a few minutes to work through the oil system. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
(25) clockwise. 8. Make a test cut and adjust the H screw (26) for best cutting power, not for maximum speed. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
(Fig A). CAUTION: Each time the chainsaw is used, check that the chain brake (13) is operating correctly. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
- Store tools so that they do not have very cold handles when next used. - Use anti-vibration gloves. - Take regular breaks of at least 10 minutes every hour away from the tool. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
• Avoid cuts that will cause the chainsaw to jam in a tree trunk or limb. • Observe the size of wood shavings, if they become dusty your chain (20) could need sharpening. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Be alert to the fact that the log may roll over. When working on a slope, always stand on the uphill side of the log. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Do not saw above shoulder height. Always use both hands to hold the chainsaw. First cut up from the bottom and finish down from the top. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Replace the spark plug or reset the electrode gap to 0.6-0.7mm. Replacement spark plugs can be purchased from your local Lawnmower or small engine store. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Check the bar rails frequently and if necessary remove burrs and square-up the rails using a flat file. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
(20) and guide bar (19) whenever the chainsaw is not being used. This includes immediately after use, transportation and service where possible. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
(20), guide bar (19) and all exposed metal parts. The chainsaw should be thoroughly cleaned of all wood chips, dirt etc prior to storage. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Inspect guide bar (19) and chain (20) for damaged. damage. For other issues not covered in this chart, please call Customer Service on 1800 909 909. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Front: hv,eq: 8 m/s , K=1.5 Rear: hv,eq: 9.5m/s , K=1.5 This product complies with: Safety ISO 11681-1: 2011 EMC EN ISO 14982:2009 AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com MODEL: №. 53942 • 10/2016 • YR-4503 (toll free)
Page 38
ALDI guarantees that our exclusive brand products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store, within 60 days from the date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline.