Maintenance - Milwaukee 0233-20 Operator's Manual

To reduce the chance of bit binding:
• Use sharp bits. Sharp bits are less likely
to bind when drilling.
• Use the proper bit for the job. There are
bits that are designed for specific pur-
poses.
• Use caution when drilling pitchy, knotty,
wet or warped material or when drill-
ing in material that may contain nails.
Typical Bracing Methods
Fig. 12
Reaction
Bracing against the floor
To reduce the risk of injury,
always unplug your tool before
performing any maintenance.
Never disassemble the tool or try
to do any rewiring on the tool's
electrical system.
MILWAUKEE service facility for
ALL repairs.
Replacing Brushes (Fig. 15 & 16)
MILWAUKEE Magnum Drills have an ex-
clusive Brush Cartridge System. The tool
will not start when the brushes are worn
to 1/8", preventing expensive damage to
the armature. New brushes are provided
in the Cartridge for fast changes any-
where.
Forward rotation

MAINTENANCE

WARNING!
Contact
Fig. 13
Forward
rotation
Bracing against your leg
Fig. 14
Reverse rotation
Bracing against a stud
Fig. 15
a
Brush holder
screw
Replacement screw
1. Unplug tool and rest it on its side with
the cartridge facing up. Loosen the
brush holder screw in the cartridge and
pull cartridge out.
12
Reaction
Reaction
Forward rotation
Extra brushes
Brushes
Brush
holder