Milwaukee 0234-1 Operator's Manual
Heavy-duty magnum drills
Hide thumbs
Also See for 0234-1:
- Operator's manual (48 pages) ,
- Operator's manual (16 pages) ,
- Operator's manual (45 pages)
Advertisement
Catalog No.
No de Catalogue
Catálogo No.
0233-20
0234-1
0234-6
0235-21
0235-6
0236-6
0244-1
HEAVY-DUTY MAGNUM DRILLS
EXTRA ROBUSTE PERCEUSES MAGNUM
TALADROS MAGNUM HEAVY-DUTY
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET
BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER
EL MANUAL DEL OPERADOR.
OPERATOR'S MANUAL
MANUEL DE L'UTILISATEUR
MANUAL DEL OPERADOR
Advertisement
Table of Contents
Related Manuals for Milwaukee 0234-1
Summary of Contents for Milwaukee 0234-1
- Page 1 OPERATOR'S MANUAL MANUEL DE L'UTILISATEUR MANUAL DEL OPERADOR Catalog No. No de Catalogue Catálogo No. 0233-20 0234-1 0234-6 0235-21 0235-6 0236-6 0244-1 HEAVY-DUTY MAGNUM DRILLS EXTRA ROBUSTE PERCEUSES MAGNUM TALADROS MAGNUM HEAVY-DUTY TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
- Page 2 jewellery, or long hair can be caught in of the power tool for operations differ- GENERAL SAFETY RULES-FOR ALL POWER TOOLS moving parts. ent from those intended could result in a hazardous situation. 15. If devices are provided for the WARNING! connection of dust extraction and SERVICE...
-
Page 3: Specifications
If damaged, Double Insulated Tools: Marking RAD low 0-565 have it repaired by a MILWAUKEE Tools with Two Prong Plugs service facility before use. If the RAD high 0-1275 plug will not fit the outlet, have a Tools marked “Double Insulated”... - Page 4 Installing Bits into Keyed Chucks (Fig. 3) a serious drop in voltage, resulting in loss hazardous. erly wired and in good electrical Cat. No. 0234-1, 0244-1 of power and possible tool damage. Refer condition. Always replace a damaged to the table shown to determine the re- Removing and Replacing Quik-Lok ®...
- Page 5 the front of the tool). This should loosen NOTE: Attaching the drill chuck to the Fig. 5 WARNING! the chuck from the spindle which has a side marked “LOW” reduces the speed right hand thread making it easy to remove by 1/3, or 33%.
-
Page 6: Operation
Bits Bits Saws Bits Bits Bits Drill Saws out. Using Forward/Reverse Switch (Fig. 10) 0233-20 1-3/4" 1" 3/8" 1" 3/8" Forward 0234-1 1-1/2" 1-1/4" 2" 4" 2" 1/2" 1-1/2" 1/2" Fig. 10 WARNING! 4-1/2" RAD low 1-1/2" 1-1/2" 1-1/2" 2-1/4"... -
Page 7: Maintenance
Wood boring bits can also one year, depending on use, return your Reaction bind if they run into nails or knots. Be pre- tool to the nearest MILWAUKEE service pared for bit binding situations. facility for the following: •... - Page 8 FIVE YEAR TOOL ACCESSORIES LIMITED WARRANTY WARNING! Every MILWAUKEE tool is tested before leaving the factory and is warranted to be free from defects in material and work- To reduce the risk of injury, manship. MILWAUKEE will repair or re- always unplug the tool before place (at MILWAUKEE’s discretion), with-...
-
Page 9: Service Parts List
02-04-0645 Ball Bearing 18-11-0075 120 Volt Field 42-14-0390 Baffl e 06-82-7398 7-18 x 2-1/16" Pan Hd. Plast. T-20 MILWAUKEE ELECTRIC TOOL CORPORATION 16-10-0800 120 V. Armature Assembly 22-84-0880 Fan Assembly 13135 W. LISBON RD., BROOKFIELD, WI 53005 43-62-0885 Side Handle...