Disassembly
40
18. Engage the TNLC flex to the connector. When correctly engaged, the flex and
connector will appear as shown below.
Figure 37. TNLC Flex Connector
19. Paste TNLC ZIF Kapton tape onto the TNLC ZIF and Flex. The Kapton tape
must align to the white witness line. Use the disassembly tool to press the
Kapton tape onto the flex.
Figure 38. Applying Kapton Tape onto the TNLC Flex and ZIF Connector
20. Attach the board to board connector.
January 10, 2008
Kapton tape
MOTOROKR E8
No gap between
the wite witness
line and the ZIF
Connector
v514320
v5143217
6809517A42-A