Motorola motorokr e8 Service Manual page 36

Disassembly
36
9. Insert the disassembly tool under the transceiver board assembly and lift the
board up.
Transceiver
board
Screw
(T3 Black, 3x)
Figure 29. Removing Transceiver PCB
10. Carefully remove the transceiver board assembly out of the phone.
11. To replace, place adhesive over the outside of the slider key slot.
Adhesive tape
Figure 30. Preparing the Slider Key Slot
January 10, 2008
Screw
Slider key slot
MOTOROKR E8
v511925
v514334
6809517A42-A