Connecting The Fm/Am Antennas; Connecting The Network Cable; Preparing A Wireless Antenna - Yamaha R-N402 Owner's Manual

Connections

Connecting the FM/AM antennas

Connect the supplied FM/AM antenna to this unit.
Fix the end of the FM antenna to a wall, and place the AM
antenna.
FM antenna
NETWORK
DIGITAL
OPTICAL
COAXIAL
Notes
• If you experience poor reception quality, install an outdoor
antenna.
• Unwind only the length of cable needed from the AM antenna
unit.
• The wires of the AM antenna have no polarity.
■ Assembling the supplied AM antenna
■ Connecting the wires of the AM antenna
1
12
En
AM antenna
ANTENNA
FM
AM
75
CD LINE
IN OUT
2
Insert
Hold down

Connecting the network cable

Connect the unit to your router with a commercially-
available STP network cable (CAT-5 or higher straight
cable).
Internet
Modem
Router
Mobile device
(such as iPhone)
NETWORK
DIGITAL
OPTICAL
This unit (rear)

Preparing a wireless antenna

If you connect the unit wirelessly, erect the wireless
antenna. For information on how to connect the unit to a
wireless network, see "Connecting to network" (p. 14).
L E S S
W IR E
K
W O R
Note
Do not apply excessive force on the wireless antenna. Doing so
may damage the antenna.
Network Attached
Storage
(NAS)
WAN
LAN
PC
Network cable
ANTENNA
FM
AM
75
CD LINE