Table of Contents
Advertisement
Optional wireless system (SH-FX70)
No power.
The indicator on the wireless
system does not turn green
even though [I/D SET] is
pressed and pairing completed.
The wireless link indicator
(e.g. " [W1] " or an indicator) is
flashing.
The wireless link indicator
(e.g. " [W1] " or an indicator)
does not light.
The wireless link indicator
keeps flashing between red and
green.
Network
I can't connect to the network.
While using my PC, I cannot
connect to the network.
VIERA CAST does not operate
or connect.
Other difficulties with playback
The disc side sliding door will
not open.
Audio and video momentarily
pause.
BD-Video or DVD-Video is not
played.
Picture-in-picture is not played
with BD-Video.
The BD-Live is not played with
BD-Video.
Alternative soundtrack and
subtitles cannot be selected.
No subtitles.
Angle cannot be changed.
The resume play function does
not work.
When other Panasonic products respond to this remote control
Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together.
1 Press [BD/SD] to select "BD/DVD".
2 While stopped, press [SETUP].
3 Press [3, 4] to select "General" and press [OK].
4 Press [3, 4] to select "Remote Control" and press
[OK].
5 Press [3, 4] to select the code (1 or 2) and press
[OK].
6 To change the code on the remote control
While pressing [OK], press and hold the numbered button ([1] or [2])
for more than 5 seconds.
7 Press [OK].
≥Ensure the AC mains lead of the wireless system is connected properly.
≥Turn the wireless system off and then back on.
≥There is no link between the main unit and the wireless system. Turn the wireless
system off and then back on. Alternatively, turn the wireless system off, disconnect the
AC mains lead, and then reconnect it.
≥Check that the main unit is turned on, and the wireless system is turned on.
≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥Ensure the surround sound setting on the main unit.
≥There is a power supply problem. Consult the dealer.
≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected.
≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on
this unit? Connect with a straight LAN cable.
≥Is the power for the modem or broadband router turned on? Turn the power on for each
device.
≥Is there a mistake in the network settings? Follow any instructions you may have
received from your ISP (Internet Service Provider) and make changes to the settings.
≥Are the broadband router settings correct? Read the operating instructions for the
broadband router.
≥Is the broadband router and/or modem correctly connected? Check the operating
instructions for each device and connect accordingly.
≥Check the "Network Settings" and "BD-Live Internet Access" settings.
≥Does your Internet Service Provider (ISP) or service contract prevent multiple
terminals connecting at the same time? Check the content of your contract.
≥Is the network connection correct?
≥Image of the video contents may be incomplete or may not display depending on how
busy the environment or the connected line is.
≥Make sure that the iPod docking switch lever has clicked into it's original position.
≥This occurs between playlist chapters or scenes (
≥When playing a title recorded on both layers, the unit automatically switches between
layers and plays the title in the same way as a normal program. However, video and
audio may momentarily cut out when the unit is switching layers.
≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number,
and is not defective.
≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
≥Some BD-Video can only be output with HDMI.
≥Confirm whether the disc supports picture-in-picture.
≥Confirm whether the disc supports the BD-Live.
≥The inserted SD card does not have sufficient available capacity.
≥The SD card is write-protected.
≥Sub contents copied to an SD card are provided by the disc producer as a part of the
BD-Video content. Even if you record images and audio onto an SD card, it cannot be
played as a BD-Live.
≥The languages are not recorded on the disc.
≥You may not be able to use the on-screen menu to change the soundtrack and
subtitles on some discs. Use the disc's menus to make changes.
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. Set "Subtitle" on the on-screen menu to "On".
≥Angles can only be changed during scenes where different angles are recorded.
≥Memorized positions are cancelled when
– pressing [∫STOP] several times.
– opening the sliding door.
≥The resume play function may not work depending on the disc.
: On BD-Video discs including BD-J, the resume play function does not work.
≥
[BD-V]
).
[AVCHD]
Remote Control
Set Code 1
Set Code 2
NOTE
Press [ ] and [OK] together
for more than 5 seconds on
the remote.
Page
—
—
—
—
40
—
—
11
11
—
31
—
—
31, 35
—
11
—
28
—
—
Cover
35
—
—
—
—
43
19
—
16
—
33
—
—
—
52
When the following indicator
appears on the unit's display and
you are unable to operate the unit
e.g., Display
The unit's remote control code
Press and hold [OK] and the
indicated number button at the
same time for more than 5 seconds.
RQT9464
49
Advertisement
Table of Contents
