Important Safety Precautions - Rollei WK 10 User Manual

Important Safety Precautions

Safety Warnings: To use this camera safely, please read and follow
these instructions carefully before use .
• Please remove the batteries if low on power in case the camera
becomes damaged caused by battery leakage .
• Do not place the camera near open flames such as candles .
• Keep the camera and PIR clean and never store it close to a heat
source or in overly soiled places .
• Press the camera's buttons gently – pressing them too hard can
damage the camera .
• Do not subject the camera to harsh impacts . Dropping the camera
may result in damage and thus void the warranty .
• Do not attempt to dismantle or repair this unit by yourself; there
are no user-serviceable parts inside . Refer servicing to Rollei only .
• Use a slightly dampened lint-free cloth to clean the lens, PIR sen-
sor, IR flash and body of the camera . Do not dismantle the camera
or use liquid or aerosol cleaners to clean the device .
• Before inserting or removing the memory card, make sure that your
hands, the camera, and the memory card are completely dry .
• Make sure that no foreign matter such as sand, hair or dirt gets
inside the camera body .
• Protect the LCD display and lens from scratches . Even a small
scratch may affect the quality of the images .
• If dirt or sand gets on the rubber seal, display or lens, wipe the area
carefully with a soft cloth that will not leave behind any fibers .
• Do not use any sharp-edged devices to clean the seal as this
may damage it and cause internal damage to the camera due to
moisture .
28