Geomagnetic; Using The Remote Control - Panasonic TX-66PW60A Operating Instructions Manual

Setup menu - Geomagnetic Correction
Magnetic interference may come from such things as unshielded motors, moving the TV while it is switched
ON, turning off a vacuum cleaner too close to the TV, lightning strikes nearby or many other things. If
geomagnetic changes cause colour patches on the screen switch your Television OFF for 30 minutes and then
switch it back ON.
Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of the
screen (colour purity).
The Geomagnetic Correction feature can be used to eliminate some interference problems.
Adjustment for geomagnetic should be performed every time the location of the TV is changed.
In some cases colour patches will not be completely eliminated even after adjustment, particularly in
ferroconcrete buildings and other structures susceptible to geomagnetic effects. In these cases the TV
location will have to be changed.
Using the Front Panel
Push the F button repeatedly to
access the Geomagnetic Correction
Menu.
000
Geomagnetic correction
- , + : Adjust tilt
F : To exit
STR F - / V
Push - / \/ or + / /\ to adjust the
picture tilt or coloured patches as
necessary. (The adjustment range is
from -16 to +16).
Push the F button to return to normal
viewing.
18
+ / ^ TV/AV

Using the Remote Control

Push the SET UP button.
Select the Geomagnetic Correction
Menu.
Access the Geomagnetic Correction.
000
Geomagnetic correction
Return
TV/AV
Adjust the picture tilt or coloured
patches as necessary. (The adjustment
range is from -16 to +16).
Push the TV/AV button to return to
normal viewing,
or
Push the SET UP button to return the
TV to the Set Up Menu.
Adjust tilt
Exit