Important Information - Panasonic TX-66PW60A Operating Instructions Manual

Important Information

This television is very heavy (please see page 39). Most of the weight is at the front of the television. Although
the television has been tilt tested and meets current Australian and International Standards, we recommend
that great care be taken when positioning the television.
* Do not allow the front of the set to overhang the stand or cabinet.
* Make sure that the stand or cabinet is flat and does not lean forward.
* Do not allow anyone to climb or sit on the television.
* Do not place any heavy weights on the television.
This television lets you to prove ownership by letting you enter personal identification into it. The "Owner ID"
function allows you to enter a security code and address information so that in the unfortunate event of theft it
will help the Police to determine the owner. Details of setting the Owner ID are on page 29.
Note: Do not record your PIN in this book.
As a further security precaution, please retain your proof of purchase along with these operating instructions.
Space has been made available on page 36 of this instruction book for recording the Serial Number. The
Serial Number can be found on the back cover of the set and on the packing carton.
The TX-76PW60A and TX-66PW60A are designed for "Interlaced" signals only. Make sure that your Settop
box, DVD player etc. is not switched to "Progressive".
The TX-86PW155A and TX-76PW155A are designed to accept Interlaced and Progressive signals.
Throughout this booklet "Programme Location Numbers" are referred to. These are memory locations into
which you can tune television broadcast stations. Any television station can be tuned into any Programme
Location Number.
∗
Your Panasonic Television is designed to overcome this with the inclusion of a demagnetising
(degaussing) function.
∗
To activate this feature, simply switch your Television OFF, or into Standby for 30 minutes and then
switch it back ON.
∗
If the television is to be left unattended for extended periods (several days or more), turn the power off to
the unit. DO NOT leave in Standby mode.
∗
This will ensure that you enjoy the picture clarity as it was meant to be.
∗
Refer to page 17 for operating instructions for the GEOMAGNETIC feature.
Warning
Owner ID
"Progressive" Video Input
Programme Location Numbers
Picture Quality
All televisions are affected by Magnetic Interference.
Magnetic interference may come from such things as unshielded motors,
moving the TV while it is switched ON, turning off a vacuum cleaner too
close to the TV, lightning strikes nearby or many other things.
The interference shows up as coloured patches which appear while the TV
is switched ON.
A typical result may look like the picture shown.
3