Shipping Condition; Country Select - Panasonic TX-66PW60A Operating Instructions Manual

Widescreen stereo colour television with picture-in-picture and teletext

Hide thumbs

Table Of Contents

Table of Contents

Tuning menu - Shipping condition

Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.

This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to

your new local stations.

The Shipping condition menu will reset all data, clearing all tuning information and resetting all control levels

back to factory settings.

Open the Setup menu

Move to Tuning menu

Access Tuning menu

Move to Shipping condition

Access Shipping condition

NOTE: If you procede with the next step all tuning data will be erased (all stations and their positions stored in

your TV's memory will be wiped out so that the new settings can be stored. All picture and sound levels will be

returned to factory settings. If you exit the procedure after this point and before Shipping condition is complete, no

station information will be stored. You will have to restart and complete the Auto setup so that the TV can be retuned.

You can exit the Shipping condition setting at any time by pressing TV/AV to exit or SETUP to return to the

tuning menu.

Press STR to start

You will be given a warning message followed by two chances to change your mind.

Each time that you are asked, "Are you sure?",

press STR to confirm,

(or exit the Shipping condition)

There is a short delay before the operation starts.

"OK" will be displayed on the screen.

You will be taken to the Auto setup option. (See page 26). You can either start the Auto setup or change the

country code.

Country select

If you turn the television off and then back on instead of starting the Auto setup, you will be given the

opportunity to change the country code.

Select the country. You can choose

between Australia and New Zealand.

Apply the country select

You will be taken to the Auto setup option. (See page 26).