Table of Contents
Advertisement
12-1-2 Separation of the Analog and Digital Board
Part Name
Analog
① Seperate the cables.
Board
Notice: The 30 pin shield cable should be removed by holding
the two lock ends of the cable, as failing to do so, could damage
the connector.
① Remove the 6 screws.
: PWH,B,M3,L10,ZPC(YEL),SWRCH18A
Analog
① Analog, Digital Board and Fan.
Board/
Digital
Board/
Fan
Digital
① Use the long-nosed pliers to remove the hex nuts.
Board
Nut-Hexagon : -,M3/8X32,ZPC(WHT),MBSBD
Samsung Electronics
Description
Disassembly & Reassembly
Description Photo
12-3
Advertisement
Table of Contents
Troubleshooting
