Assembling the pedestal
Use the four assembly screws
TH-P58V10A
●
Make sure that the screws are securely tightened.
●
Forcing the assembly screws the wrong way will strip
the threads.
●
"L" or "R" mark is stamped on the bottom of the pole.
Pole
R
Securing the TV
Use the assembly screws
●
Make sure that the screws are securely tightened.
●
Carry out the work on a horizontal and level surface.
This TV could fall over if it's pushed, pulled or knocked down.
We therefore recommend the TV is secured to the base as illustrated.
●
This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee protection in
all cases.
Fall-prevention parts
Band (2)
●
TKLA4301
Securing to a base
Fix pedestal and base together with band.
to fasten the left and right poles to the base securely.
A
L
Pole
Front
D
to fasten securely.
Preventing the TV from falling over
Clamp (2)
●
TKLA4201 (TH-P58V10A)
●
TKLA3601 (TH-P65V10A)
This image is for illustrative purposes only.
TH-P65V10A
●
Make sure that the screws are securely tightened
using Allen wrench
E
●
Forcing the assembly screws the wrong way will strip
the threads.
Pole
B
Arrow
mark
Pole
Screw (2)
Clamp
A
E
Pole
Front
D
view from bottom
Hole for pedestal
installation
Pole
D
Wood screw (2)
Screw
Band
Wood screw
9