1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.
2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
3 Service Navigation 3.1. PCB Layout Board Name Function Board Name Function Power Supply Data Driver (Lower Right) Non serviceable. Data Driver (Lower Left) P-Board should be exchanged for service. Scan Drive Main AV input, processing Sustain Drive Remote receiver, Power LED, C.A.T.S sensor...
4 Specifications Power Source AC 220 - 240 V, 50 / 60 Hz (Except P) AC 110 - 240 V, 50 / 60 Hz (P) Power Power Rating 250 W (Except P) 255 W (P) Standby condition 0.4 W Display panel Aspect Ratio 16:9 Visible screen size...
Page 9
USB 1/2 USB 2.0 TYPE A Connectors DC 5 V, Max. 500 mA ETHERNET 10BASE-T / 100BASE-TX Dimensions (W × H × D) 1,212 mm × 782 mm × 324 mm (With Pedestal) 1,212 mm × 747 mm × 93 mm (TV only) Mass 34.0 kg Net (With Pedestal) 30.5 kg Net (TV only)
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more than 3 seconds. TV will be forced to the factory shipment setting after this SELF CHECK. 5.1.3. Model and Keys: Model No. Keys One-to-One WIDEVINE TH-P50X30D/G/K/M/P/S/V...
6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [i] button of the remote control three times within 2 seconds. 6.1.2.
Page 12
6.1.4. Contents of adjustment mode • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...
6.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.
6.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Hotel Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Initial INPUT Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched press [AV] button of the remote control three times within...
6.5. Data Copy by SD Card 6.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other TVs.
Page 16
6.5.3. Data copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to SD card.
Page 17
6.5.4. Data copy from SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from SD card to TV set.
7 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 7.1. Check of the IIC bus lines 7.1.1. How to access 7.1.1.1. Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
7.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit. Blinking Times Contents Check point...
8 Disassembly and Assembly Instructions 8.1. Remove the Rear cover 8.4. Remove Side terminal cover 1. See PCB Layout (Section 3) 8.2. Remove the AC inlet 1. Remove the screws (×2 2. Remove the Side terminal cover. Caution: To remove P.C.B. wait 1 minute after power was off for dis- charge from electrolysis capacitors.
8.6. Remove the A-Board 8.8. Remove the SN-Board 1. Remove the Tuner unit. (See section 8.5.) 1. Disconnect the flexible cables (SN21, SN22, SN23, SN24, SN25 and SN26) connected to the SN-Board. 2. Remove the screws (×2 ) and remove the A-Board. 2.
8.10. Remove the Stand bracket and 8.11. Remove the C1-Board the Hanger metals 1. Remove the Hanger metal R and the Stand bracket. (See section 8.10.) 1. Remove the Plasma panel section from the servicing 2. Remove the Flexible cable holder fastening screws (×8 stand and lay on a flat surface such as a table (covered by a soft cloth) with the Plasma panel surface facing 3.
8.13. Remove the Plasma panel sec- 8.14. Remove the Glass holders tion from the Cabinet assy 1. Remove the Cabinet assy. (See section 8.13.) 2. Remove the screws (×7 1. Remove the Plasma panel fastening screws (×4 ) and 3. Remove the Glass holder top. remove the Cabinet assy.
8.16. Replace the Plasma panel Caution: A new Plasma panel itself without Hanger metals is fragile. To avoid the damage to new Plasma panel, carry a new Plasma panel taking hold of the Hanger metals after assembling the Hanger metals and the Stand bracket. 1.
9 Measurements and Adjustments 9.1. Adjustment 9.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW or HIGH. Procedure 1. Go into main item [VSUS] in Service Mode. LOW or HIGH will be displayed. 2.
Page 28
9.1.2. Sub-Contrast adjustment Name of measuring instrument Connection Remarks RF generator Base Band signal generator HD signal generator Steps Remarks Note: Connect IIC cable (bus controller-cable) after banner OSD appear. And after SRQ-L, begin an adjustment 2 seconds later. Sub-contrast adjustment is unadjusted for AV/ HD input.
Page 29
Steps Remarks Another procedure Connect IIC cable (bus controller-cable) after banner OSD appear. And after SRQ-L, begin an adjustment 2 seconds later. Adjustment of HD system 1. At 1080i 100% Full White or Split colour bar receive component signal, as shown below. 2.
Page 30
9.1.3. White balance adjustment The adjusting method is different according to the PEAKS EEPROM version. [copy adjustment] : Peaks EEPROM ver.1.00- [Differential and copy adjustment] : Peaks EEPROM ver.1.01- Name of measuring instrument Connection Remarks W/ B pattern Panel surface Color analyzer (Minolta CA-100 or equivalent) Steps...
Page 31
Steps Remarks [Differential and copy adjustment] Execute adjustment for color temp. [NORMAL], and set data for color temp. [COOL], [WARM] by data shift WB of HD (or PAL) copies the adjustment data from an adjusted format side. Note: The adjustment does only color temp. [NORMAL]. A adjustment value difference from [NORMAL] is written to EEPROM as for [COOL] and [WARM] by operat- ing a [OK] key.
10 Block Diagram 10.1. Main Block Diagram DIGITAL SIGNAL PROCESSOR HDMI1-3 (HDMI2) ETHERNET DATA TMDS DATA ETHER PHY ETHERNET LAN CON I/F HDMI I/F SIF_OUT SIF I/F G/S ONLY SD CARD DATA SD CARD SD CARD I/F IFD_OUT SLOT TUNER TUNER I/F USB 1,2 USB I/F...
10.3. Block (2/4) Diagram DIGITAL SIGNAL PROCESSOR IC9300 PD5L VIDEO DATA PLASMA AI VIDEO DATA LVDS DATA H/V Sync Control VIDEO DATA Sub Filed Processor P+3.3V IC9304 P+3.3V P+3.3V SI/SO SOS8_SS IIC0 FLASH I/F FLASH SOS8_SS P_S0 DATA DRIVER CONTROL P_S1 D_UHZ IC5000...
10.4. Block (3/4) Diagram POWER SUPPLY COLD COLD AC CORD Fuse AC Vin PHOTO (Live) Detection COUPLER (Neutral) FILTER STANDBY SS11 VOLTAGE CONVERTER T101 FET SW Vsus P+15V FET SW Relay F15V for prevention of inrush current F15V STB5V Drop IC SOUND15V OCP/OVP P+15V...
11 Wiring Connection Diagram 11.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 11.2. Wiring (1)
Page 45
Model No. : TH-P50X30D/G/K/M/P/S/V Schematic Diagram Note...
Page 46
Model No. : TH-P50X30D/G/K/M/P/S/V Replacement Parts List Note...
Page 47
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (1/12)
Page 48
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (2/12)
Page 49
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (3/12)
Page 50
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (4/12)
Page 51
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (5/12)
Page 52
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (6/12) and K-Board...
Page 53
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (7/12)
Page 54
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (8/12) S-10...
Page 55
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (9/12) S-11...
Page 56
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (10/12) S-12...
Page 57
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (11/12) S-13...
Page 58
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (12/12) S-14...
Page 59
Model No. : TH-P50X30D/G/K/M/P/S/V C1-Board S-15...
Page 60
Model No. : TH-P50X30D/G/K/M/P/S/V C2-Board S-16...
Page 61
Model No. : TH-P50X30D/G/K/M/P/S/V SN-Board (1/6) S-17...
Page 62
Model No. : TH-P50X30D/G/K/M/P/S/V SN-Board (2/6) S-18...
Page 63
Model No. : TH-P50X30D/G/K/M/P/S/V SN-Board (3/6) S-19...
Page 64
Model No. : TH-P50X30D/G/K/M/P/S/V SN-Board (4/6) S-20...
Page 65
Model No. : TH-P50X30D/G/K/M/P/S/V SN-Board (5/6) S-21...
Page 66
Model No. : TH-P50X30D/G/K/M/P/S/V SN-Board (6/6) S-22...
Page 67
Model No. : TH-P50X30D/G/K/M/P/S/V SS-Board (1/2) S-23...
Page 68
Model No. : TH-P50X30D/G/K/M/P/S/V SS-Board (2/2) S-24...
Page 69
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (Foil Side) S-25...
Page 70
Model No. : TH-P50X30D/G/K/M/P/S/V A-Board (Component Side) S-26...
Page 71
Model No. : TH-P50X30D/G/K/M/P/S/V K-Board S-27...
Page 72
Model No. : TH-P50X30D/G/K/M/P/S/V C1-Board S-28...
Page 73
Model No. : TH-P50X30D/G/K/M/P/S/V C2-Board S-29...
Page 74
Model No. : TH-P50X30D/G/K/M/P/S/V SN-Board (Foil Side) S-30...
Page 75
Model No. : TH-P50X30D/G/K/M/P/S/V SN-Board (Component Side) S-31...
Page 76
Model No. : TH-P50X30D/G/K/M/P/S/V SS-Board S-32...
Page 77
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TZTNP01MHUV A-PRINT COMPLETE 1 (V) (RTL)PAVCTH TZTNP01MNUG A-PRINT COMPLETE 1 (G) (RTL)PAVCTH TZTNP01MRUD A-PRINT COMPLETE 1 (D) (RTL)PAVCTH TZTNP01MTUK A-PRINT COMPLETE 1 (K) (RTL)PAVCTH...
Page 78
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C3047 F1J1A106A043 C 10UF, 10V C3048 ECJ1VB1A105K C 1UF, 10V C3049 ECJ1VB1A105K C 1UF, 10V C3053 F1J1A106A043 C 10UF, 10V C3054 F1G1C104A077 C 0.1UF 16V...
Page 79
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C4930 F1G1C104A077 C 0.1UF 16V C4931 F1G1C104A077 C 0.1UF 16V C4941 F1J1A106A043 C 10UF, 10V C4942 F1J1A106A043 C 10UF, 10V C4952 F2H1A101A040 C 100UF, 10V...
Page 80
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8108 F1G1C104A077 C 0.1UF 16V C8110 F1G1C104A077 C 0.1UF 16V C8112 F1K1E106A136 C 10UF, 25V C8114 F1K1E106A136 C 10UF, 25V C8116 F1K1E106A136 C 10UF, 25V...
Page 81
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8627 F1G1C104A077 C 0.1UF 16V C8629 F1J0G2260001 C 22 UF 4 V C8630 F1J0G2260001 C 22 UF 4 V C8707 F1G1C223A081 C 0.022UF, 16V...
Page 82
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C9409 F1G1A105A047 C 1UF 10V C9411 F1G1A105A047 C 1UF 10V C9413 F1G1A105A047 C 1UF 10V C9809 F1K0J226A049 C 22UF, 6.3V 1 PAVCTH C9810 F1G1E1030005 C 0.01UF 25V...
Page 83
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16287 F1H1H104A970 C 0.1UF, , 50V C16310 F2A2T181A018 E 180UF, 220V 1 PAVCTH C16315 ECJ1VB1A105K C 1UF, 10V C16316 ECJ1XB1C104K C 0.1UF, Z, 16V...
Page 84
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16796 F1K1E475A134 C 4.7UF 25V C16813 F2A2T1210001 E 120UF, 220V 1 PAVCTH C16833 F1K2J222A014 C 2200PF ,630V C16834 F1K2J222A014 C 2200PF ,630V C16842 F2A2C1010028...
Page 85
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D4672 DZ2J056M0L ZENER DIODE D4673 DZ2J056M0L ZENER DIODE D5350 B0JCMD000066 ZENER DIODE D8716 DA2J10100L DIODE D8720 B0JCMD000066 ZENER DIODE D9806 B0ADCK000001 DIODE 1 PAVCTH...
Page 86
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D16641 B0FCBN000001 DIODE 1 PAVCTH D16642 B0FCBN000001 DIODE 1 PAVCTH D16643 B0FCBN000001 DIODE 1 PAVCTH D16662 DZ2J330M0L ZENER DIODE D16663 DZ2J330M0L ZENER DIODE D16664 DZ2J330M0L...
Page 87
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC8902 TVR***2V 1 (V) PAVCTH IC9300 C1AB00003409 1 PAVCTH IC9304 TVRS207AB 1 PAVCTH IC9400 C0JBAU000010 IC9401 C0JBAU000010 IC9810 C0DBAYY00915 1 PAVCTH IC14901 AN16531A-VT 1 PAVCTH...
Page 88
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks L3005 J0JYC0000331 CHIP INDUCTOR L3006 J0JYC0000331 CHIP INDUCTOR L3007 J0JYC0000331 CHIP INDUCTOR L3008 J0JYC0000331 CHIP INDUCTOR L4500 J0JHC0000117 CHIP INDUCTOR L4501 J0JYC0000068 CHIP INDUCTOR...
Page 89
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks PC16192 B3PBA0000580 1 PAVCTH PC16461 B3PBE0000058 1 PAVCTH PC16462 B3PBE0000060 1 PAVCTH PC16463 B3PBE0000060 1 PAVCTH PC16480 B3PBA0000580 1 PAVCTH PC16603 B3PBA0000580 1 PAVCTH...
Page 90
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks Q16817 DSC2001Q0L TRANSISTOR Q16818 B1CBGD000001 Q16819 B1CBGD000001 Q16820 B1CBGD000001 Q16891 DSA2001S0L TRANSISTOR Q16892 DSC2001Q0L TRANSISTOR R1010 D0GA101JA015 M 100 OHM, J,1/16W R1011 D0GA101JA015 M 100 OHM, J,1/16W...
Page 91
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R3051 D0GA221JA023 M220 OHM, J.1/16 W R3052 D0GA221JA023 M220 OHM, J.1/16 W R3056 D0GA680JA023 M 68 OHM, J,1/16W R3058 D0GA680JA023 M 68 OHM, J,1/16W...
Page 92
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R4638 D0GA103JA015 M 10KOHM,J,1/16W R4639 D0GA102JA023 M1KOHM, J.1/16 W R4646 D0GA680JA023 M 68 OHM, J,1/16W R4647 D0GA680JA023 M 68 OHM, J,1/16W R4648 D0GA680JA023 M 68 OHM, J,1/16W...
Page 93
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8118 D0GA183JA023 M 18K OHM J.1/16W R8200 D1BA2400A014 M 240 OHM,J.1/16 W R8203 D1BA1001A014 M 1KOHM,J. 1/16 W R8204 D1BA1001A014 M 1KOHM,J. 1/16 W...
Page 94
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8639 D0GA103JA015 M 10KOHM,J,1/16W R8640 D0GA103JA015 M 10KOHM,J,1/16W R8641 D0GBR00J0004 M 0 OHM J 1/10W R8644 D0GAR00J0005 M 0 OHM, 1/16W R8648 D0GA560JA023 M 56 OHM, J,1/16W...
Page 95
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8953 D0GA272JA023 M 2.7KOHM, J.1/16W R8954 D0GA272JA023 M 2.7KOHM, J.1/16W R8955 D0GA272JA023 M 2.7KOHM, J.1/16W R8956 D0GA272JA023 M 2.7KOHM, J.1/16W R8957 D0GA272JA023 M 2.7KOHM, J.1/16W...
Page 96
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R14989 D1BD1502A044 M 15KOHM,J.1/8 W R16001 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16003 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16022 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16023 D0GF7R5JA047 M 7.5 OHM,J, 1/3W...
Page 97
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16474 D0GB102JA065 M 1KOHM,J,1/10W R16475 D0GB472JA065 M 4.7KOHM, J,1/10W R16476 D0GB222JA065 M 2.2KOHM,J,1/10W R16479 D0GD103JA052 M 10KOHM,J,1/8W 1 PAVCTH R16490 D1BD1203A077 M 120KOHM,D.1/10W 1 PAVCTH R16491 D1BD1203A077 M 120KOHM,D.1/10W...
Page 98
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16621 D0GD221JA052 M 220 OHM,J 1/4W 1 PAVCTH R16622 D0GD221JA052 M 220 OHM,J 1/4W 1 PAVCTH R16631 D0GB103JA065 M 10K OHM J 1/10W R16633 D0GD223JA052...
Page 99
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16902 D0GB6R2JA065 M 6.2 OHM J 1/10W 1 PAVCTH R16921 D1BB2152A055 M 21.5KOHM, 1/10W 1 PAVCTH R16922 D1BB9531A055 M9.53KOHM,J.1/10W R16937 D0GB184JA065 M 180KOHM J 1/10W...
Page 100
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks SN26 K1MND6BA0264 6P CONNECTOR SN2810 B3JB00000078 K1KY03BA0236 3P CONNECTOR SS11 K1KY03B00006 3P CONNECTOR SS23 K1MY20BA0345 20P CONNECTOR SS52 K1MY13BA0376 13P CONNECTOR SS55 K1MY13BA0376 13P CONNECTOR...
Page 101
Model No. : TH-P50X30D/G/K/M/P/S/V Exploded View 1 S-57...
Page 102
Model No. : TH-P50X30D/G/K/M/P/S/V Exploded View 2 S-58...
Page 103
Model No. : TH-P50X30D/G/K/M/P/S/V Packing 1 S-59...
Page 104
Model No. : TH-P50X30D/G/K/M/P/S/V Packing 2 S-60...
Page 105
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks K2AHYH000042 AC INLET WITH CABLE 1 PAVCTH K2CN3YY00006 AC CORD 1 (G) (V) K2CT3YY00021 AC CORD 1 (K) (M) (S) K2CT3YY00033 AC CORD 1 (P) PAVCTH...
Page 106
Model No. : TH-P50X30D/G/K/M/P/S/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TTU4TA0063 REAR COVER 1 (P) PAVCTH TTU4TA0066 REAR COVER 1 (V) PAVCTH TUX4TA012 50HANGER METAL 2 PAVCTH TXFEA01NNUA SPEAKER L/R ASSY 2 PAVCTH TXFKP01NNUA...