Screensaver
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
1
SET UP
2
Reversal / Scroll selection
3
Mode selection
4
Start setting
5
24
(For preventing after-images)
Press to display the Setup menu screen.
Press to select the Screensaver.
Press to select the Screensaver screen.
Press to select the Function.
Press to select the desired function.
White bar scroll
White bar scroll : The white bar will scroll from left to right.
Image Reversal : Negative image will be displayed on the screen.
Press to select the Mode.
Press to select each mode items.
Off
Interval : Operates when Periodic Time and Operating Time are setup and those
times arrive.
Time Designation : Operates when Start Time and Finish Time are setup and those
On : Operates when Start is selected and the
When the Mode is set to On, press to
select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop
the Screensaver under On, press the
Image Reversal
times arrive.
R
button.
Setup
Component/RGB-in select
RGB
Input label
RGB1
Signal
Screensaver
Off
Power save
Standby save
On
Power management
Off
English ( UK )
OSD Language
Screensaver
10 : 00
PRESENT TIME
Start
Function
White bar scroll
Mode
Off
Start Time
0 : 00
Finish Time
0 : 00
Side panel
High
Wobbling
Off
Peak limit
Off
Screensaver
10 : 00
PRESENT TIME
Start
Function
White bar scroll
Mode
Off
Start Time
0 : 00
Finish Time
0 : 00
Side panel
High
Wobbling
Off
Peak limit
Off
(ACTION) is pressed.
Screensaver
10 : 00
PRESENT TIME
Start
Function
White bar scroll
Mode
On
Start Time
0 : 00
Finish Time
0 : 00
Side panel
High
Wobbling
Off
Peak limit
Off
1/2